Power Line Construction Planning
Map large areas to acquire detailed, precise data using drones. Project teams can optimize power line designs based on accurate geographic coordinates.
Site Survey
Project teams can rely on cost-effective drone solutions to efficiently visualize reality and collect surveying data needed to evaluate large worksites.
Power Line Construction Planning
Traditional Challenges in Power Line Construction Planning
The lack of precise position data makes it difficult to align BIM designs, road vector maps, and satellite imagery, costing time and labor.
Without a reality model, it is difficult to accurately account for a safety distance between the power lines and buildings in the vicinity during the design phase.
The BIM designs can be quite different from the reality model, making it difficult to visualize and verify the design.
How Drones Improve Power Line Construction Planning
Quickly take off and fly over the worksite to create a 3D model of the area where a route might be planned.
Create 3D models with accurate positioning data that can be readily fitted into the BIM models to visualize designs.
Generate better route designs using 3D models that are compatible with a variety of GIS software.
Related Products
MATRICE 350 RTK
- The DJI M350 RTK is backward compatible with the M300 RTK payloads and accessories such as the TB60 Intelligent Flight Batteries.
- Existing DJI Zenmuse payloads (H20T, H20 and H20N, as well as P1 and L1) need to be updated to the latest firmware to integrate with the DJI M350 RTK.
- Existing third-party payloads for M300 RTK need to be updated to support the M350 RTK, and some need to be upgraded to SkyPort from V1 to V2.
ZENMUSE L1
- The DJI Zenmuse L1 is a cost-efficient and easy to use enterprise aerial LiDAR payload, engineered for the M300 RTK and M350 RTK.
- The L1 integrates a Livox sensor, high-precision IMU, a one-inch 20MP CMOS visual camera with mechanical shutter, and 3-axis stabilised gimbal system.
- Combine it with the M300 RTK or M350 RTK and the mapping software DJI Terra for a highly-efficient all-in-one aerial LiDAR solution to obtain 3D point clouds for high accuracy and detailed reconstruction.
- The L1 can be used across a range of industry verticals, such as energy, AEC, forestry, public safety, and more.
DJI ZENMUSE P1
- The DJI Zenmuse P1 is a high-performance, versatile surveying payload, engineered for the M300 RTK and M350 RTK.
- The camera has a full-frame 45MP CMOS sensor and can be integrated with a 24mm, 35mm, or 50mm lens. The P1 is a 3-axis stabilised gimbal.
- When combined with the M300 RTK or M350 RTK and mapping software package, DJI Terra, the P1 camera provides an efficient and high-accuracy aerial photogrammetry solution.
- Integrating the P1 with the M300 RTK or M350 RTK dramatically increases productivity, being up to 10 times more efficient than the Phantom 4 RTK for both orthomosaic and oblique mapping missions.
Site Survey
Traditional Challenges in Site Survey
Grid worksites are often located in complex geographies that are hard to access, costing significant time, manpower, and equipment investment to survey.
Satellite or manned aircraft data is expensive and cannot be accessed on demand, while the data accuracy is subpar.
The DLGs produced are difficult to visualize, unlike 2D maps or 3D models.
How Drones Empower Site Survey
Easily take off and fly over complex worksites to collect highly accurate data.
Rapidly generate 2D orthomosaics and 3D models as references for engineering planning and design.
Superimpose designs with 2D and 3D reconstructions to visualize the effect and make adjustments.
Related Products
MATRICE 350 RTK
- The DJI M350 RTK is backward compatible with the M300 RTK payloads and accessories such as the TB60 Intelligent Flight Batteries.
- Existing DJI Zenmuse payloads (H20T, H20 and H20N, as well as P1 and L1) need to be updated to the latest firmware to integrate with the DJI M350 RTK.
- Existing third-party payloads for M300 RTK need to be updated to support the M350 RTK, and some need to be upgraded to SkyPort from V1 to V2.
ZENMUSE L1
- The DJI Zenmuse L1 is a cost-efficient and easy to use enterprise aerial LiDAR payload, engineered for the M300 RTK and M350 RTK.
- The L1 integrates a Livox sensor, high-precision IMU, a one-inch 20MP CMOS visual camera with mechanical shutter, and 3-axis stabilised gimbal system.
- Combine it with the M300 RTK or M350 RTK and the mapping software DJI Terra for a highly-efficient all-in-one aerial LiDAR solution to obtain 3D point clouds for high accuracy and detailed reconstruction.
- The L1 can be used across a range of industry verticals, such as energy, AEC, forestry, public safety, and more.
DJI ZENMUSE P1
- The DJI Zenmuse P1 is a high-performance, versatile surveying payload, engineered for the M300 RTK and M350 RTK.
- The camera has a full-frame 45MP CMOS sensor and can be integrated with a 24mm, 35mm, or 50mm lens. The P1 is a 3-axis stabilised gimbal.
- When combined with the M300 RTK or M350 RTK and mapping software package, DJI Terra, the P1 camera provides an efficient and high-accuracy aerial photogrammetry solution.
- Integrating the P1 with the M300 RTK or M350 RTK dramatically increases productivity, being up to 10 times more efficient than the Phantom 4 RTK for both orthomosaic and oblique mapping missions.
