Painpoints
Manual inspections are time-consuming and inefficient, especially across large mining sites.
Conventional inspection methods typically require significant manpower and resources.
Low inspection frequency might lead to increased operational costs and equipment failures.
Mining assets in hard-to-reach locations present challenges for traditional inspection methods.
Advantages
Easily evaluate asset status, significantly streamlining the data collection process.
Reduce cost and improve efficiency with easy-to-deploy aerial data collection solutions.
Collect real-time data, enabling mining operations to respond quickly to changing situations.
Aerial perspective allows you to view assets in difficult-to-reach areas, offering a more comprehensive inspection.
Drone Platform
DJI Matrice 4D
Weight: 1850 g
Max Flight Time: 54 minutes
Environment Adaptability: IP55 rating, max takeoff altitude 6500 m, max wind speed resistance 12 m/s
Sensing System: Omnidirectional binocular vision system, supplemented with a 3D infrared sensor at the bottom of the aircraft
Mechanical Shutter Speed: 2–1/2000 s, minimum photo interval 0.5 s
Wide-Angle Camera: 4/3-inch CMOS, 20MP effective pixels
Medium Tele Camera: 1/1.3-inch CMOS, 48MP effective pixels
Telephoto Camera: 1/1.5-inch CMOS, 48MP effective pixels
Laser Rangefinding: 1800 m measurement range (1 Hz) @20% reflectivity target
DJI Dock 3
Weight: 55 kg (without the drone)
Size: 1760×745×485 mm (L×W×H, dock cover opened)
Environment Adaptability: -30° to 50° C (-22° to 122° F) operating temperature, IP56 rating, maximum operating altitude 4500 m
Max Operating Radius: 10 km
Charging Time: 27 minutes
Security Camera (Internal) Resolution: 1920×1080
Payload and Software
DJI FlightHub 2
Drone and dock’s cloud management system.
Workflow
1 Data Collection:
– Plan a routine mission for specific asset inspection or to navigate the operation area.
2 Data Processing:
– Automate DJI FlightHub 2 data processing for 3D models.
3 Data Analysis:
– Utilize DJI Terra or third-party software for further intelligent analysis.
Drone Platform
DJI Matrice 400
Weight: 9740±40 g (with batteries)
Max Takeoff Weight: 15.8 kg
Max Payload: 6 kg
Max Flight Time: 59 minutes
Max Horizontal Speed: 25 m/s
Sensing System: Omnidirectional binocular vision system (surround view provided by full-color fisheye vision sensors), horizontal rotating LiDAR, upper LiDAR, downward 3D infrared range sensor, and six-direction mmWave radar
Environment Adaptability: IP55 rating, max takeoff altitude 7000 m, operating temperature -20° to 50° C (-4° to 122° F)
Payload Compatibility: Zenmuse H30 Series, Zenmuse L2, Zenmuse P1, Zenmuse V1, Zenmuse S1, and third-party payloads
Payload and Software
Zenmuse H30T
Wide-Angle RGB Camera: 1/1.3-inch CMOS, 48MP effective pixels
Zoom RGB Camera: 1/1.8-inch CMOS, 40MP effective pixels, 34× hybrid optical zoom
Infrared Thermal Camera: 1280×1024@30fps
NIR Auxiliary Light Illumination Range: Approx. 8m diameter circle @ 100 m
Laser Range Finder: Max measurement range 3000 m
DJI FlightHub 2
Drone and dock’s cloud management system.
Workflow
1 Data Collection:
– Manual inspection flight or use live mission recording for future repeatable missions.
2 Data Processing:
– Use DJI FlightHub 2 to provide a live transmission feed or upload collected data to the cloud for efficient team collaboration.
3 Data Analysis:
– Use DJI Thermal Analysis Tool or any preferred third-party software for in-depth thermal or visual analysis.
Contact Us
For more information about product demo or trial, leave your contact information in the form below. You can also reach out to your local dealer for more information.