Painpoints
Mining survey environments are often remote and fraught with safety risks that threaten personnel safety.
Traditional ground-based survey methods are costly, timely, and inefficient.
Ensuring data quality through traditional methods can be challenging.
Advantages
Swiftly cover vast and hazardous areas, significantly streamlining data collection process and enhancing personnel safety.
Reduce cost and improve efficiency with easy-to-deploy aerial data collection solutions.
Repeat data collection missions ensuring the data quality and accuracy.
Drone Platform
DJI Matrice 4E
Weight: 1219 g (with propellers)
Max Flight Time (without wind): 49 minutes
Environment Adaptability: Max takeoff altitude 6000 m, max wind speed resistance 12 m/s
Sensing System: Omnidirectional binocular vision system, supplemented with a 3D infrared sensor at the bottom of the aircraft
Mechanical Shutter Speed: 2–1/2000 s, minimum photo interval 0.5 s
Wide-Angle Camera: 4/3-inch CMOS, 20MP effective pixels
Medium Tele Camera: 1/1.3-inch CMOS, 48MP effective pixels
Telephoto Camera: 1/1.5-inch CMOS, 48MP effective pixels
Laser Rangefinding: 1800 m measurement range (1 Hz) @20% reflectivity target
Payload and Software
DJI Terra
Modeling and flight mission plan
DJI Pilot 2
Ground control.
Workflow
Workflow
1 Data Collection:
– Plan a 2D map mission for regular orthomosaic data acquisition or a waypoint mission for regular site video recording and pano stitching.
2 Data Processing:
– Import the data to DJI Terra to process for DOM, DSM, Point Cloud, and 3D model outputs.
3 Data Analysis:
– Perform annotations, measurements and volume analysis directly in DJI Terra. Import resulting DOM, DSM or 3D models into your preferred third-party software for further analysis.
Drone Platform
DJI Matrice 400
Weight: 9740±40 g (with batteries)
Max Takeoff Weight: 15.8 kg
Max Payload: 6 kg
Max Flight Time: 59 minutes
Max Horizontal Speed: 25 m/s
Sensing System: Omnidirectional binocular vision system (surround view provided by full-color fisheye vision sensors), horizontal rotating LiDAR, upper LiDAR, downward 3D infrared range sensor, and six-direction mmWave radar
Environment Adaptability: IP55 rating, max takeoff altitude 7000 m, operating temperature -20° to 50° C (-4° to 122° F)
Payload Compatibility: Zenmuse H30 Series, Zenmuse L2, Zenmuse P1, Zenmuse V1, Zenmuse S1, and third-party payloads
Payload and Software
Zenmuse P1
Camera Sensor: 45 MP full-frame
Shutter: Global mechanical shutter, 1/2000 s
Gimbal: 3-axis stabilized gimbal with Smart Oblique Capture
DJI Pilot 2
Ground control
DJI Terra
Modeling and flight mission plan
Workflow
Workflow
1 Data Collection:
– Plan a 2D map mission for regular orthomosaic data acquisition or a waypoint mission for regular site video recording and pano stitching.
2 Data Processing:
– Import the data to DJI Terra to process for DOM, DSM, Point Cloud, and 3D model outputs.
3 Data Analysis:
– Perform annotations, measurements and volume analysis directly in DJI Terra.
– Import resulting DOM, DSM or 3D models into your preferred 3rd-party software for further analysis.
Contact Us
For more information about product demo or trial, leave your contact information in the form below. You can also reach out to your local dealer for more information.