General Inspection
Gain a live aerial overview of pipeline conditions and monitor potential risks regularly to identify issues early on and address them in a timely manner.
Leak Detection and Repair (LDAR)
Identify leakages quickly and accurately using drones equipped with specialized sensors, keeping personnel safe and enabling timely decision making.
Emergency Response
Fly over affected areas, document damage to infrastructure and property, and create accurate models that help optimize repair efforts.
General Inspection
Traditional Challenges in General Inspection
Personnel could be exposed to safety risks when inspecting and maintaining pipelines that are spread out in remote areas, while vandalism and theft monitoring is difficult.
Failure to detect illegal construction and occupation in time may pose risks or cause damage to oil and gas pipelines.
As the pipeline ages, the risk of failure and leakage increases, the frequency of inspections needs to be increased and a lot of manpower is required.
How Drones Empower General Inspection
Drone are flexibly deployed to quickly gain an overview of the pipeline network, while capturing details with a zoom sensor.
Digitize inspection results by deploying drones to gain a live view of the pipeline network to collect evidence of illegal activities and keep the footage on file for recordkeeping and condition comparisons.
Augmenting traditional inspection with drone insight improves efficiency while protecting workers from hazardous environments.
Related Products
MATRICE 350 RTK
- The DJI M350 RTK is backward compatible with the M300 RTK payloads and accessories such as the TB60 Intelligent Flight Batteries.
- Existing DJI Zenmuse payloads (H20T, H20 and H20N, as well as P1 and L1) need to be updated to the latest firmware to integrate with the DJI M350 RTK.
- Existing third-party payloads for M300 RTK need to be updated to support the M350 RTK, and some need to be upgraded to SkyPort from V1 to V2.
ZENMUSE L1
- The DJI Zenmuse L1 is a cost-efficient and easy to use enterprise aerial LiDAR payload, engineered for the M300 RTK and M350 RTK.
- The L1 integrates a Livox sensor, high-precision IMU, a one-inch 20MP CMOS visual camera with mechanical shutter, and 3-axis stabilised gimbal system.
- Combine it with the M300 RTK or M350 RTK and the mapping software DJI Terra for a highly-efficient all-in-one aerial LiDAR solution to obtain 3D point clouds for high accuracy and detailed reconstruction.
- The L1 can be used across a range of industry verticals, such as energy, AEC, forestry, public safety, and more.
ZENMUSE H20N
- The DJI Zenmuse H20N is a night vision payload for the DJI M300 RTK and DJI M350 RTK, perfect for operating in low-light environments.
- This hybrid sensor features a 20x hybrid optical zoom and wide-angle camera – both with starlight sensors – as well as 640 x 512 resolution dual zoom thermal cameras with 2x8x optical zoom, and a laser rangefinder with 1200m range.
- The H20N supports synchronised zoom between thermal and starlight night vision cameras. Users can scale both images at the same time. This doubles efficiency and makes it easier to compare details side by side.
- The H20N’s ultra-low-illumination starlight-grade night vision capabilities – with low illumination to 0.0001 Lux – captures the scene clearly, even in darkness, setting a new standard for security missions, as well as search and rescue operations or emergency situations requiring immediate recognition.
- The H20N is a rugged and robust payload, with an IP44 rating and -20°C to 50°C operating temperature.
Leak Detection and Repair (LDAR)
Traditional Challenges in LDAR
Leakages compromise the safety of the site and the surrounding communities.
The location of the leak can be hard to pinpoint, let alone acquiring a reading on the leakage concentration.
Personnel on the ground are unable to quickly visualize the scale of the leakage or predict its development without an overview.
How Drones Help with LDAR
Drones equipped with gas detector payloads can scout large areas quickly and pinpoint the location of the leak so it can be addressed immediately.
Drones can help personnel determine the scale of the leakage, while sending back aerial insights that help monitor repairs onsite.
Related Products
MATRICE 350 RTK
- The DJI M350 RTK is backward compatible with the M300 RTK payloads and accessories such as the TB60 Intelligent Flight Batteries.
- Existing DJI Zenmuse payloads (H20T, H20 and H20N, as well as P1 and L1) need to be updated to the latest firmware to integrate with the DJI M350 RTK.
- Existing third-party payloads for M300 RTK need to be updated to support the M350 RTK, and some need to be upgraded to SkyPort from V1 to V2.
ZENMUSE L1
- The DJI Zenmuse L1 is a cost-efficient and easy to use enterprise aerial LiDAR payload, engineered for the M300 RTK and M350 RTK.
- The L1 integrates a Livox sensor, high-precision IMU, a one-inch 20MP CMOS visual camera with mechanical shutter, and 3-axis stabilised gimbal system.
- Combine it with the M300 RTK or M350 RTK and the mapping software DJI Terra for a highly-efficient all-in-one aerial LiDAR solution to obtain 3D point clouds for high accuracy and detailed reconstruction.
- The L1 can be used across a range of industry verticals, such as energy, AEC, forestry, public safety, and more.
ZENMUSE H20N
- The DJI Zenmuse H20N is a night vision payload for the DJI M300 RTK and DJI M350 RTK, perfect for operating in low-light environments.
- This hybrid sensor features a 20x hybrid optical zoom and wide-angle camera – both with starlight sensors – as well as 640 x 512 resolution dual zoom thermal cameras with 2x8x optical zoom, and a laser rangefinder with 1200m range.
- The H20N supports synchronised zoom between thermal and starlight night vision cameras. Users can scale both images at the same time. This doubles efficiency and makes it easier to compare details side by side.
- The H20N’s ultra-low-illumination starlight-grade night vision capabilities – with low illumination to 0.0001 Lux – captures the scene clearly, even in darkness, setting a new standard for security missions, as well as search and rescue operations or emergency situations requiring immediate recognition.
- The H20N is a rugged and robust payload, with an IP44 rating and -20°C to 50°C operating temperature.
Emergency Response
Traditional Challenges in Emergency Response
Emergency repairs require timely coordination between onsite and offsite teams, which can be hard to manage from the ground alone.
Repairs that involve hot work must be monitored closely to ensure safety and compliance.
Repairs can take place simultaneously at multiple locations onsite, which can be difficult to monitor
How Drones Elevate Emergency Response
Deploy to quickly map the scene of the accident, providing crucial information on the scale so teams can set a plan of action.
Monitor hot work sites from the air, sending live feeds to the command center to rapidly coordinate team assignments.
Related Products
MATRICE 350 RTK
- The DJI M350 RTK is backward compatible with the M300 RTK payloads and accessories such as the TB60 Intelligent Flight Batteries.
- Existing DJI Zenmuse payloads (H20T, H20 and H20N, as well as P1 and L1) need to be updated to the latest firmware to integrate with the DJI M350 RTK.
- Existing third-party payloads for M300 RTK need to be updated to support the M350 RTK, and some need to be upgraded to SkyPort from V1 to V2.
ZENMUSE L1
- The DJI Zenmuse L1 is a cost-efficient and easy to use enterprise aerial LiDAR payload, engineered for the M300 RTK and M350 RTK.
- The L1 integrates a Livox sensor, high-precision IMU, a one-inch 20MP CMOS visual camera with mechanical shutter, and 3-axis stabilised gimbal system.
- Combine it with the M300 RTK or M350 RTK and the mapping software DJI Terra for a highly-efficient all-in-one aerial LiDAR solution to obtain 3D point clouds for high accuracy and detailed reconstruction.
- The L1 can be used across a range of industry verticals, such as energy, AEC, forestry, public safety, and more.
ZENMUSE H20N
- The DJI Zenmuse H20N is a night vision payload for the DJI M300 RTK and DJI M350 RTK, perfect for operating in low-light environments.
- This hybrid sensor features a 20x hybrid optical zoom and wide-angle camera – both with starlight sensors – as well as 640 x 512 resolution dual zoom thermal cameras with 2x8x optical zoom, and a laser rangefinder with 1200m range.
- The H20N supports synchronised zoom between thermal and starlight night vision cameras. Users can scale both images at the same time. This doubles efficiency and makes it easier to compare details side by side.
- The H20N’s ultra-low-illumination starlight-grade night vision capabilities – with low illumination to 0.0001 Lux – captures the scene clearly, even in darkness, setting a new standard for security missions, as well as search and rescue operations or emergency situations requiring immediate recognition.
- The H20N is a rugged and robust payload, with an IP44 rating and -20°C to 50°C operating temperature.
