DJI Power Solar Panel Adap Module (MPPT)

When a DJI Power Series Power Station is connected to the DJI Power Solar Panel Adapter Module (MPPT), users can connect solar panels via the dXT60 interface on the adapter panel for DJI Power Series eco-charging. It is recommended to use DJI Power Series Power Stations in conjunction with DJI-certified Zignes brand solar panels. If using other brands of solar panels, the use of the MPPT module and conversion of the solar panel port to the XT60 interface are required to enable solar charging for DJI Power Series.

* All accessories are available for purchase separately.

Tips

1. One MPPT module can connect up to three solar panels.

2. To use solar panels not officially recommended by DJI and to avoid damage to the MPPT module and Power Station, ensure that the open circuit voltage of the solar panel is less than 30 V. The output power of each solar panel must not exceed 200 W, with the total output power of the solar panels connected to the entire MPPT module limited to 400 W.

3. ‌When using solar panels with the MPPT module, install the included metal heat dissipation bracket.‌

4. When used with DJI Power 500, the maximum output power of the solar panels connected to the entire adapter module must not exceed 300 W.

Package Contents

Solar Panel Adapter Module for DJI Power (MPPT) × 1

Metal Heat Dissipation Brackets × 2

Ball-end Hex Wrench × 1

10 mm Screw × 3

20 mm screw × 3

Technical Specifications

Total Output:

Single Channel:

Max. 200 W

Triple Channels:

Max. 400 W (with DJI Power 1000)‌‌

Max. 300 W (with DJI Power 500)‌‌

Input Voltage: 12-30 V, DC

Maximum Input Current:

Single Channel: 10 A

Triple Channels: 16 A

Operating Temperature: -10°C to 45°C (41° – 113°F)

Compatibility

DJI Power 1000

DJI Power 500