Painpoints
Firefighters often find themselves short-handed and unequipped to properly evaluate the risks in the event of a hazardous material leakage.
Water rescue scenarios are often coordinated by land-based teams with limited resources and information.
Fire prevention efforts usually require extensive manual labor, with teams going on foot scouting for potential fire risks.
Advantages
Improve response efficiency with valuable situational awareness and quality data.
Gain rapid aerial perspectives and real-time monitoring, enhancing the effectiveness of water rescue missions.
Cover large areas, make informed decisions, and allocate resources effectively with accurate aerial data.
Drone Platform
DJI Matrice 400
Weight: 9740±40 g (with batteries)
Max Takeoff Weight: 15.8 kg
Max Payload: 6 kg
Max Flight Time: 59 minutes
Max Horizontal Speed: 25 m/s
Sensing System: Omnidirectional binocular vision system (surround view provided by full-color fisheye vision sensors), horizontal rotating LiDAR, upper LiDAR, downward 3D infrared range sensor, and six-direction mmWave radar
Environment Adaptability: IP55 rating, max takeoff altitude 7000 m, operating temperature -20° to 50° C (-4° to 122° F)
Payload Compatibility: Zenmuse H30 Series, Zenmuse L2, Zenmuse P1, Zenmuse V1, Zenmuse S1, and third-party payloads
Payload and Software
Zenmuse H30T
Wide-Angle RGB Camera: 1/1.3-inch CMOS, 48MP effective pixels
Zoom RGB Camera: 1/1.8-inch CMOS, 40MP effective pixels, 34× hybrid optical zoom
Infrared Thermal Camera: 1280×1024@30fps
NIR Auxiliary Light Illumination Range: Approx. 8m diameter circle @ 100 m
Laser Range Finder: Max measurement range 3000 m
DJI Pilot 2
Ground control
Workflow
1 Mission Execution:
– Fly manually over the affected area to determine the severity of the situation. Switch between infrared and visual views to evaluate the situation.
– Use the Link Zoom feature to zoom in simultaneously with thermal and visual sensors.
– Install the IR Density Filter to increase the measurement range of the thermal sensor.
– Share the coordinates with ground teams through the DJI Pilot 2 QR code or DJI FlightHub 2.
2 Post Mission Documentation:
– Collect the videos and photos captured during the mission through DJI FlightHub 2 or download from the payload SD card to be used as supporting documentation for post-disaster analysis.
Drone Platform
Matrice 30T
Weight (incl. two batteries): 3770 ± 10 g
Max Flight Time: 41 min
Sensing System: Six-directional sensing and positioning
Environment Adaptability: Max service ceiling above sea level (without other payload) 7,000 m (with 1676 propellers); max wind resistance 12 m/s
Zoom Camera: 1/2-inch CMOS, effective pixels: 48MP
Payload and Software
DJI Pilot 2
Ground control
Workflow
1 Mission Execution:
– Using DJI Pilot 2 app, add the last known location to the map as a GPS Pin.
– In the DJI Pilot 2 camera view, use the AR of the pin to fly directly toward the correct coordinates.
– Fly manually over search areas switching between visual and thermal views to identify the missing person.
– Utilize white hot or black hot palettes as needed along with high gain mode.
– Once the subject is identified, get accurate coordinates using the Pin Point function. Share Pin Point coordinates to ground teams through DJI Pilot 2 QR code or DJI FlightHub 2.
2 Post Mission Documentation:
– Collect the videos and photos captured during the mission through DJI FlightHub 2 or download from the drone SD card to be used as supporting documentation for post-disaster analysis.
Drone Platform
DJI Matrice 4T
Weight: 1219 g (with propellers)
Max Flight Time (without wind): 49 minutes
Environment Adaptability: Max takeoff altitude 6000 m, max wind speed resistance 12 m/s
Sensing System: Omnidirectional binocular vision system, supplemented with a 3D infrared sensor at the bottom of the aircraft
Wide-Angle Camera: 1/1.3-inch CMOS, 48MP effective pixels (Matrice 4T)
Medium Tele Camera: 1/1.3-inch CMOS, 48MP effective pixels
Telephoto Camera: 1/1.5-inch CMOS, 48MP effective pixels
Infrared Thermal Camera: 1280 × 1024@30fps (Super Resolution enabled, Night Mode not activated)
Laser Rangefinding: 1800 m measurement range (1 Hz) @ 20% reflectivity target
Payload and Software
DJI Pilot 2
Ground control
DJI Terra
Modeling and flight mission plan
Workflow
1 Mission Execution:
– Plan a 2D or Smart Oblique Mission based on the actual landscape situation to generate regular orthomosaic images or 3D models.
– Fly manually over the affected area looking for hotspots. Switch between infrared and visual views (wide or zoom) to evaluate the infrastructure and vegetation.
2 Post Mission Documentation:
– Map the affected areas for post-incident reports and preventative action briefs.
Contact Us
For more information about product demo or trial, leave your contact information in the form below. You can also reach out to your local dealer for more information.