Painpoints
Traditional air support, such as helicopters, is limited and costly, leaving ground teams to cover vast areas.
A lack of comprehensive mission information results in exposing ground teams to unnecessary risk.
Information is scattered between multiple ground teams and the command center, hindering the response’s effectiveness and mission success.
Advantages
Deploy timely and cost-effective aerial support to assist patrol and tactical teams.
Eliminate uncertainty with visual and thermal drone data, uncovering hidden dangers and de-escalating situations.
Coordinate teams positions and improve tactical deployment through easy-to-share, live-streamed drone imagery.
Drone Platform
DJI Matrice 4T
Weight: 1219 g (with propellers)
Max Flight Time (without wind): 49 minutes
Environment Adaptability: Max takeoff altitude 6000 m, max wind speed resistance 12 m/s
Sensing System: Omnidirectional binocular vision system, supplemented with a 3D infrared sensor at the bottom of the aircraft
Wide-Angle Camera: 1/1.3-inch CMOS, 48MP effective pixels (Matrice 4T)
Medium Tele Camera: 1/1.3-inch CMOS, 48MP effective pixels
Telephoto Camera: 1/1.5-inch CMOS, 48MP effective pixels
Infrared Thermal Camera: 1280 × 1024@30fps (Super Resolution enabled, Night Mode not activated)
Laser Rangefinding: 1800m measurement range (1 Hz) @20% reflectivity target
Payload and Software
DJI Pilot 2
Ground control
Workflow
1 Mission Execution:
– Using DJI Pilot 2 App, add the target location to the map as a GPS Pin.
– Deploy the drone and manually fly towards the area of interest.
– In DJI Pilot 2 Camera View, use AR of the pin to guide the pilot toward the correct location.
– Activate discrete mode for night tactical or sensitive operations.
– Switch between infrared and visual views or use both at the same time to evaluate the situation and provide enhanced situational awareness to ground teams.
2 Post Mission Documentation:
– Upload the videos and images collected to DJI FlightHub 2 or download from the aircraft SD card for evidence reports or mission debrief.
Drone Platform
Matrice 30T
Weight (incl. two batteries): 3770 ± 10 g
Max Flight Time: 41 min
Sensing System: Six-directional sensing and positioning
Environment Adaptability: Max Service Ceiling Above Sea Level (without other payload) 7,000 m (with 1676 propellers); Max Wind Resistance 12 m/s
Zoom Camera: 1/2-inch CMOS, Effective pixels: 48MP
Payload and Software
DJI Pilot 2
Ground control
Workflow
1 Mission Execution:
– Using DJI Pilot 2 App, add the target location to the map as a GPS Pin.
– Deploy the drone and manually fly towards the area of interest.
– In DJI Pilot 2 Camera View, use AR of the pin to guide the pilot toward the correct coordinates.
– Activate discrete mode for night or sensitive operations.
– Switch between infrared and visual views to evaluate the situation and provide enhanced situational awareness to ground teams.
– Use the Smart Track function to keep track of moving objects while reducing pilot cognitive load.
– Pin locations of interest and easily center the camera on them.
2 Post Mission Documentation:
– Upload the videos and images collected to DJI FlightHub 2 or download from the aircraft SD card for evidence reports or mission debrief.
Drone Platform
DJI Matrice 400
Weight: 9740±40 g (with batteries)
Max Takeoff Weight: 15.8 kg
Max Payload: 6 kg
Max Flight Time: 59 minutes
Max Horizontal Speed: 25 m/s
Sensing System: Omnidirectional binocular vision system (surround view provided by full-color fisheye vision sensors), horizontal rotating LiDAR, upper LiDAR, downward 3D infrared range sensor, and six-direction mmWave radar
Environment Adaptability: IP55 rating, max takeoff altitude 7000 m, operating temperature -20° to 50° C (-4° to 122° F)
Payload Compatibility: Compatible with the Zenmuse H30 Series, Zenmuse L2, Zenmuse P1, Zenmuse V1, Zenmuse S1, and third-party payloads.
Payload and Software
Zenmuse H30T
Wide-Angle RGB Camera: 1/1.3-inch CMOS, 48MP effective pixels
Zoom RGB Camera: 1/1.8-inch CMOS, 40MP effective pixels, 34× hybrid optical zoom
Infrared Thermal Camera: 1280×1024@30fps
NIR Auxiliary Light Illumination Range: Approx. 8m diameter circle @ 100 m
Laser Range Finder: Max measurement range 3000 m
DJI Pilot 2
Ground control
Workflow
1 Mission Execution:
– Using DJI Pilot 2 App, add the target location to the map as a GPS Pin.
– Deploy the drone and manually fly towards the area of interest.
– In DJI Pilot 2 Camera View, use AR of the pin to guide the pilot toward the correct coordinates.
– Activate discrete mode for night or sensitive operations.
– Switch between infrared and visual views to evaluate the situation and provide enhanced situational awareness to ground teams.
– Use the Smart Track function to keep track of moving objects while reducing pilot cognitive load.
– Pin locations of interest and easily center the camera on them.
2 Post Mission Documentation:
– Upload the videos and images collected to DJI FlightHub 2 or download from the aircraft SD card for evidence reports or mission debrief.
Contact Us
For more information about product demo or trial, leave your contact information in the form below. You can also reach out to your local dealer for more information.