Painpoints
Fixed security systems may offer limited coverage and can be vulnerable to blind spots, potentially compromising their effectiveness.
In the event of a triggered alarm or security breach, security teams need to mobilize to the location to assess the situation, which may reduce overall effectiveness.
Intruders might be prepared for the response actions and tactics, exposing security personnel to unexpected dangerous situations.
Advantages
Gain full insights into the status of the perimeter and patrol areas with bird’s-eye visual and thermal views.
Rapidly assess the situation’s status, gauge the severity, and deploy security teams more effectively.
Support security response with aerial intel to reduce personnel risk and enhance decision-making with real-time data.
Drone Platform
DJI Matrice 4TD
Weight: 1850 g
Max Flight Time: 54 minutes
Environment Adaptability: IP55 rating, max takeoff altitude 6500 m, max wind speed resistance 12 m/s
Sensing System: Omnidirectional binocular vision system, supplemented with a 3D infrared sensor at the bottom of the aircraft
Wide-Angle Camera: 1/1.3-inch CMOS, 48MP effective pixels
Medium Tele Camera: 1/1.3-inch CMOS, 48MP effective pixels
Telephoto Camera: 1/1.5-inch CMOS, 48MP effective pixels
Infrared Thermal Camera: 1280 × 1024@30fps (UHR Infrared Image function enabled, Night Scene mode not enabled)
Laser Rangefinding: 1800m measurement range (1 Hz) @20% reflectivity target
DJI Dock 3
Weight: 55 kg (without the drone)
Size: 1760×745×485 mm (L×W×H, dock cover opened)
Environment Adaptability: -30° to 50° C (-22° to 122° F) operating temperature, IP56 rating, maximum operating altitude 4500 m
Max Operating Radius: 10 km
Charging Time: 27 minutes
Security Camera (Internal) Resolution: 1920×1080
Payload and Software
DJI FlightHub 2
Drone and dock’s cloud management system.
Workflow
1 Mission Planning:
(1) For Patrol Missions:
– Using the waypoint mission planning feature in DJI FlightHub 2, determine the perimeter to be inspected, making sure to cover potential blind spots or frequently breached points.
(2) For Alarm Response:
– Using the DJI FlightHub 2 platform, take control of the DJI Dock 3 closest to the alarm location and launch the drone.
– Search for the coordinates on the map and set it as Fly-to destination.
2 Mission Execution:
– The drone automatically takes off and starts the flight mission.
– The pilot can take over live flight control and operate the drone, payload, and switch between the Wide, Tele, and IR cameras as needed.
– Live stream the drone images to command centers through DJI FlightHub 2.
3 Post Mission Documentation:
– Captured videos and photos will automatically be uploaded to DJI FlightHub 2 to be used as evidence or debrief documentation.
Drone Platform
Matrice 30T
Weight (incl. two batteries): 3770 ± 10 g
Max Flight Time: 41 min
Sensing System: Six-directional sensing and positioning
Environment Adaptability: Max service ceiling above sea level (without other payload) 7,000 m (with 1676 propellers); max wind resistance 12 m/s
Zoom Camera: 1/2-inch CMOS, effective pixels: 48MP
Payload and Software
DJI Pilot 2
Ground control
Workflow
1 Mission Execution:
– Using DJI Pilot 2 App, add the alarm location to the map as a GPS Pin.
– In DJI Pilot 2 camera view, use AR of the pin to guide the pilot toward the correct coordinates.
– Fly manually over the incident area switching between visual and thermal views for enhanced situational awareness.
– Use the Smart Track feature to take cognitive load off the pilots and keep moving objects centered.
– Live stream the drone images to command centers through DJI FlightHub 2.
2 Post Mission Documentation:
– Captured videos and photos can be uploaded to DJI FlightHub 2 or downloaded from the SD card to be used as evidence or debrief documentation.
Drone Platform
DJI Matrice 4T
Weight: 1219 g (with propellers)
Max Flight Time (without wind): 49 minutes
Environment Adaptability: Max takeoff altitude 6000 m, max wind speed resistance 12 m/s
Sensing System: Omnidirectional binocular vision system, supplemented with a 3D infrared sensor at the bottom of the aircraft
Wide-Angle Camera: 1/1.3-inch CMOS, 48MP effective pixels (Matrice 4T)
Medium Tele Camera: 1/1.3-inch CMOS, 48MP effective pixels
Telephoto Camera: 1/1.5-inch CMOS, 48MP effective pixels
Infrared Thermal Camera: 1280 × 1024@30fps (Super Resolution enabled, Night Mode not activated)
Laser Rangefinding: 1800 m measurement range (1 Hz) @ 20% reflectivity target
Payload and Software
DJI Pilot 2
Ground control
DJI FlightHub 2
Drone and dock’s cloud management system.
Workflow
1 Mission Execution:
(1) For Alarm Response:
– Using DJI Pilot 2 App, add the last known location to the map as a GPS Pin.
– Fly manually over to the incident area switching between visual and thermal views for enhanced situational awareness.
(2) For Patrol Missions:
– Plan perimeter mission using DJI Pilot 2 or DJI FlightHub 2 waypoint mission planning feature.
– Select the flight plan and execute the mission.
– Stop and resume the mission depending on the needs.
– Live stream the drone images to command centers through DJI FlightHub 2.
2 Post Mission Documentation:
– Captured videos and photos can be uploaded to DJI FlightHub 2 or downloaded from the SD card to be used as evidence or debrief documentation.
Contact Us
For more information about product demo or trial, leave your contact information in the form below. You can also reach out to your local dealer for more information.